Ignition Switch replacementThis guide should help you replacing the ignition switch on a VW Eurovan.
|
|
Switch location
Philips screw location
Dismount
-remove the lower Steering column cover.
-remove the top cover.
-unplug the plug
-locate the phillips screw
-now the tricky part,
I used a small flat head screwdriver, and worked the screw on an angel from the top of the column, it was only hard till it was lose, you will only be able to turn the screw 90° at a time.
Oder people recommend a philips bit, and work the bit with a set of pliers or bend a phillips screwdriver 90°. (see picture below)
-remove the switch
Mount
-put the new switch in
-put the philips screw back in
-mount the plug
-mount the steering column covers
DONE!
Pictures from T4-Wiki.de
Note:
www.t4-wiki.de is a very good source for Eurovan related informations and guides, sadly it's only available in German. Google translate might help.
To post a comment about this guide you must be signed-in
Recent Comments (1 total):
| rwheels - Aug 18, 2009 3:55 am | |||
|---|---|---|---|
| |||
